服务机型

我公司专业代理Assembleon MC-24用滚珠丝杆,直线导轨及其他传动件

本公司专业销售Assembleon MC-24用滚珠丝杠,直线导轨等各类传动件,在贴片机行业有服务多台Assembleon MC-24经验,并针对Assembleon MC-24高精度贴片机设备备有大量丝杠,导轨库存,欢迎客户对Assembleon MC-24丝杠导轨采购及咨询。

 The MC-24 and MC-24X are brand new pick & place solutions with a footprint of just 21 and 27 square feet, almost half the footprint of competitive models in its class but with full and extended range of capabilities. The MC-24 (chip placer) and MC-24X (IC placer) have, respectively, been designed for a maximum of 72,000 (50,000 IPC) and 54,000 (30,000 IPC) components per hour, using 96 intelligent feeder positions each. Saving you an extra machine if you need an output of 60.000 components per hour in high component-mix applications.
Main benefits
• Dual beam pick and place system with highest space productivity cph per square meter
• 120 Feeder positions for MC-24 and 96 for MC-24X
• Lowest cost of ownership
• Standard large board size of up to 700 x 510mm
• Compact size of 1.25 x 1.68 meter per system
• High mount reliability with new side view and scanning camera
• High flexibility features for fast new product introductions and change-overs
• Easy to use
MC- 24和MC- 24X是全新的拾放,占地面积21日和27平方英尺,几乎有一半在同类竞争车型的足迹,但充分和扩展的能力范围的解决方案。在MC -24(芯片砂矿)和MC -24X(IC砂矿),分别被设计为最多72,000(50,000 IPC)的每小时54,000(30,000 IPC)的组件,使用96智能馈线每个位置。节约您宝贵的,如果你需要额外的机器每小时60.000组件的输出高的元件组合应用。

主要优点双光束挑选和地方系统最高每平方米的生产力空间CPH
120 MC- 24和96个直属立场MC- 24X
最低的拥有成本
标准大板尺寸可达700 ×510毫米
紧凑的尺寸为1.25 ×1.68米,每个系统
装载高可靠性与新的侧视图和扫描相机
灵活性高的特点,快速推出新产品和改变收购
易于使用...............

MC-24

Maximum output per hour 72k

IPC 9850 output per hour 50k

Placement accuracy at 3 sigma 50 micron for chips 30 micron QFP

Minimum component range 0.4 x 0.2mm (01005)

Maximum component range

Standard 8 x 8mm (0.32 x 0.32")

Optional 100 x 32mm  (3.94 x 1.26")

Maximum component height 6.5mm (0.26") 
Maximum board size (L x W) 700 x 510mm  (27.55 x 20")
 
Minimum board size (L x W) 50 x 50mm (2 x 2")
Board thickness 0.4 to 4mm(0.015 to 0.157")
 
Automatic tool bit exchange nozzles 
Tape feeding positions (8mm) 120 with fixed feederbar,96 trolleys 
Feeder options tape, stick tape, stick,
Footprint (L x W) incl. front side feeder trolleys 1254 x 1687mm 1(49.37 x 66.42")

MC- 24

每小时最大输出72K

IPC9850输出每小时50K

在3个西格玛50微米,30微米QFP芯片的贴装精度

最少的元件范围为0.4 ×0.2毫米(01005)

最大组件范围

8标准,宽8mm(0.32× 0.32“)

可选的100 x 32毫米(3.94 x1.26“)

最大元件高度6.5毫米(0.26“)
最大电路板尺寸(长x宽)700×510毫米(27.55× 20“)
 
最小的电路板尺寸(长x宽)50 x 50毫米(2 × 2“)
板厚0.4毫米(0.015到0.157“)
 
自动换刀位交换喷嘴
磁带喂养的立场(8)有固定feederbar的120元,96手推车
直属选项磁带,磁带坚持,坚持,
足迹(长x宽),包括。前端馈线手推车1254 x1687毫米1(49.37 x66.42“)