服务机型

我公司专业经营Assembleon MC-8用滚珠丝杆,直线导轨及其他传动件

本公司专业销售Assembleon MC-8用滚珠丝杠,直线导轨等各类传动件,在贴片机行业有服务多台Assembleon MC-8经验,并针对Assembleon MC-8高精度贴片机设备备有大量丝杠,导轨库存,欢迎客户对Assembleon MC-8丝杠导轨采购及咨询。

 The MC-8 is equipped with 3 fully independent servo-controlled Flying Nozzle Change (FNC) heads, each carrying up to 6 nozzles. It delivers high-end performance with chips, ICs and odd form components. Not only does it offer placement rates up to 8.9k components per hour with a placement accuracy of 30 micron for ICs and QFPs, but it also handles an extremely wide component range as tall as 25.5mm. Precision force control allows optimal handling of press-fit through-hole connectors with forces up to 30N.
By holding up to 119 feeding positions, the MC-8 offers the ultimate in changeover flexibility.
Main benefits
The standard MC-8 comes with many software and hardware features that improve product quality, increase production efficiency and reduce maintenance, including:
• Intelligent electrical feeders
• Z-Servo controlled placement heads for accurate stress-free component mounting
• Automatic board width and thickness adjustment for fast changeover
• Automatic nozzle cleaning station
• Automatic temperature feedback compensates for temperature variations
• Fiducial recovery function that eliminates the need to remove and clean the PCB
• Feeder indicators that simplify setup and reduce feeder setup
• Double board support system that decreases board transfer time
• Force control
• Tape cutting
MC- 8配备了3个完全独立的伺服控制飞行喷嘴变化(FNC)磁头,每个携带多达6喷嘴。它提供了高端性能,芯片,集成电路和奇数的形式组成。它不仅提供了就业率高达每小时8.9k元件的贴装精度30微米集成电路和QFPs,但它也处理25.5毫米高大的一个极其广泛的组件范围内。精密力控制允许通过压接孔连接器与力量,以30N的最佳处理。
最多可容纳119喂养的立场,MC- 8提供最终在转换的灵活性。
主要优点标准MC- 8许多软件和硬件的功能,提高产品质量,提高生产效率和降低维护,包括:
智能电气馈线
Z轴伺服控制准确无压力的组成部分贴装头安装
快速更换自动板的宽度和厚度调整
喷嘴自动清洗站
自动温度反馈补偿温度变化
基准点的恢复功能,无需拆除和清理的PCB
直属指标,简化安装和降低馈线安装
双板支持系统,减小电路板传输时间
力控制
胶带切割
Specifications
Maximum output per hour 8.9k
IPC 9850 output per hour 7.9k
Placement accuracy at 3 sigma 50 micron for chips, 30 micron for QFP
Minimum component range 0.4 x 0.2mm (01005)
Maximum component range 
Standard 100 x 45mm  (3.94 x 1.77")
Optional 55x55mm   (2.17 x 2.17")
Maximum component height 25.5mm (1")
Programmable placement force 10 to 30N
Maximum board size (L x W)
Standard 700 x 460mm   (27.55 x 18.11")
Optional 700 x 510mm  (27.55 x 20")
Minimum board size (L x W) standard: 50 x 50mm (2x2")
Board thickness 0.4 to 4mm   (0.015 to 0.157")
Automatic tool bit exchange nozzles, grippers
Tape feeding positions (8mm) 119
Feeder options tape, stick, tray, tape strips, tube, re-use, waffle pack
Footprint (L x W) incl. front side feeder trolleys 1650 x 1562mm (64.96 x 61.50")
规格
每小时最大输出8.9k
IPC9850输出每小时7.9k
3西格玛50微米芯片的贴装精度,QFP的30微米
最少的元件范围为0.4 ×0.2毫米(01005)
最大组件范围
标准100 x 45毫米 (3.94 x1.77“)
可选55x55mm (2.17 x2.17“)
最大元件高度25.5毫米(1)
可编程贴装力,10日至30N
最大电路板尺寸(长x宽)
标准700 x460毫米 (27.55 x18.11“)
可选700 x510毫米(27.55× 20“)
最小板尺寸(长x宽)标准:50 x 50毫米(2X2“)
板厚0.4至4mm (0.015到0.157“)
自动换刀位交换喷嘴,夹子
磁带喂养的立场(8)119
直属磁带选项,棍,托盘,磁带带,管,再利用,华夫格包
足迹(长x宽),包括。前端馈线手推车1650 x1562毫米(64.96 x61.50“)